New lithium version of the magneto

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Isetech
    Platinum Member

    • Mar 2022
    • 2274

    #1

    New lithium version of the magneto

    This is the best news this week. We use these magneto literally every single day on site, the old lead acid version lasts the entire day and some.

    I cant wait to get my hands on the new lithium version, I just hope they are as good as the lead acid version, and we get more than a year out of the batteires.

    Shop Magneto Lithium-Ion Led Lantern 20 hr Lantern Emergency Light at Makro. Enjoy secure shopping with 100% reliable delivery, great prices and many ways to pay.
    Comments are my opinion, unless regulations are attached to support the comment. This is social media, not a court room.
  • Isetech
    Platinum Member

    • Mar 2022
    • 2274

    #2
    If you look at the comment section, you will notice a comment about the USB cable, you must use the one supplied with the light for it to functuion correctly.
    Comments are my opinion, unless regulations are attached to support the comment. This is social media, not a court room.

    Comment

    • Isetech
      Platinum Member

      • Mar 2022
      • 2274

      #3
      And even more good news, sherlo have released their lithium 3 amp power supply. I have just been using the drop in lithium 7 amp with the older version, which has worked for me.


      3 AMP Power-Supply Battery charger with Low Battery Cut Out: 3A_Lithium Charging of 7AMP Lithium batteries Alarm panel Battery backup CCTV Battery backup Backup power supply for door controller. Magnetic lock for an Access Control solution Microprocessor Controlled charging output. Current limited 2AMP Low battery switch off at 10V DC. Over voltage protection >15V Resettable […]
      Comments are my opinion, unless regulations are attached to support the comment. This is social media, not a court room.

      Comment

      • Isetech
        Platinum Member

        • Mar 2022
        • 2274

        #4
        Looking at the sherlo specs and make sure you read the instruction manual to se tthe bridge in the correct position.

        • Input Voltage Range: 110V ~ 230V AC 50Hz
        • Output Voltage: 13V ~ 14.4V Adjustable
        • Max Current output: 3A DC / 35Watts
        • Relay contact rating: 10A
        • AC Fail output rating: 140mA Positive switching
        • Operating temp: -3°C to 60°C
        • Dimensions (lxbxh): 200 x 180 x 87mm
        • Gross Weight: 0.895Kg
        • Warranty: 12 Months.
        Comments are my opinion, unless regulations are attached to support the comment. This is social media, not a court room.

        Comment

        Working...